Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted

Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted
Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted
Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted
Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted
Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted

Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted

Loco is in excellent condition and full working order. All factory fitted detailing is present and intact, with additional detailing fitted to both buffer beams. Fitted with a Loksound V4 decoder which is loaded with a Legomanbiffo Class 45 sound project. A detailed list of all functions will be supplied.

Firmware version 4.17.9249. Loco address set to 3. 2 x Roads & Rails 20x20x7mm (8ohm) loudspeakers are fitted next to the PCB on top of the chassis. Wired in parallel (4ohms) to the PCB to enable a quality reproduction of the classic'Sulzer' sound. Also fitted is a Lais powered auxiliary board linked to the decoder to change Aux3 & Aux4 from logic to powered functions. This allows for additional lighting functions as follows. Cab lights - Can be switched on or off independently of each other. Set up to automatically illuminate the selected driving cab when stationary, will then automatically switch off when the loco moves and switch on again when the loco stops. Tail lights - Still set up to be automatically lit at the non-driving end based on the selected direction of travel but can now be (correctly) switched off when hauling a train. All four tail lights can be illuminated at the same time when the loco is'parked'. All lighting has been set up at a dimmed level to produce a more prototypical look in keeping with the era of operation. This loco has been optimised to run under DCC control, analogue functionality has been switched off on the decoder. Additional pickups have been added to the inner axle on each of the bogies. All additional buffer beam detailing has been fitted using a PVA glue.

Should you wish to remove any of the detailing, to fit the other tension lock coupling for example, this should be easy to do without causing damage to either the detailing or the loco. A driver and second man have been fitted into the No. 1 end cab for just a touch more realism! The outer packaging is in fair condition with a number of marks from storage, the inner packaging is in very good condition.

The original paperwork is included. Additional unfitted accessories include the following. 1 x tension lock coupling for No. 1 x dummy draw hook for No.

Royal Signals' etched nameplate and regimental crest. Happy to answer any questions.

Offered for sale to UK based buyers only. Collection in person is welcome.

This item is in the category "Collectables\Model Railways & Trains\Railways & Trains\Locomotives". The seller is "peterdexter" and is located in this country: GB. This item can be shipped to United Kingdom.


Bachmann 32-678DS Class 45 D55 Legomanbiffo Sound Fitted


Home    Map    Contact    Privacy Policy    Terms of service